HVACopediaKinghome · Heat pump
C8 ODU drive jumper cap error
What the control is telling you
The drive board reports a jumper cap mismatch (documented in the Eco manual body, not its list).
Applies to: Kinghome Ultranixx Eco KD24UHO to KD60UHO outdoor units with KD..UHI air handlers
Likely causes
- Cap missing or wrong
Test and repair steps
- Fit the correct cap.
Models that show this code
12 models in Kinghome Ultranixx Eco
Other codes on the same units
- A1 Outdoor fan IPM module protection
- C4 ODU jumper cap error
- E1 High pressure protection / high-pressure sensor fault
- E3 Low pressure protection / low-pressure sensor fault
- E4 Compressor discharge temperature too high
- F2 Sensor fault (indoor coil or outdoor condenser)
- F3 Outdoor ambient temperature sensor fault
- F4 Sensor fault (outdoor condenser or discharge)
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: Kinghome Ultranixx Eco KD24-60UHO service manual, sec. 3.3-3.4. Summarized in our own words; check the original manual for your model.
Homeowner looking at this code? See what it means for you and when to call a technician.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.