HVACopediaKinghome · Heat pump
02 Forced operation value: heating
What the display is showing
Value 02 inside debug menu item 09 on the KU outdoor board means forced heating operation is switched on.
Applies to: Kinghome Ultranixx cold-climate KU36UHO and KU60UHO outdoor units with KU..UH2I and KD..UHI air handlers
What to do
- In menu 09 choose 02 with SW2 or SW3 and save with SW1.
Models that show this code
6 models in Kinghome Ultranixx
Other codes on the same units
- 01 Forced operation value: cooling
- 06 Debug menu item 06: forced defrost
- 08 Debug menu item 08: refrigerant recovery
- 09 Debug menu item 09: forced operation
- C4 ODU jumper cap error
- E1 High pressure protection / high-pressure sensor fault
- E3 Low pressure protection / low-pressure sensor fault
- E4 Compressor discharge temperature too high
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: Kinghome Ultranixx cold-climate KU36/60UHO service manual GC202306, sec. 2.3.7 forced operation control. Summarized in our own words; check the original manual for your model.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.