Goodman · Furnace

OP Normal - waiting for a call

Normal status Goodman/Amana *MVC95/*CVC9 two-stage ComfortNet

What the display is showing

Shown on the two-digit display when the furnace is idle and waiting for the thermostat. All good.

Applies to: GMVC95/AMVC95 upflow and *CVC9 counterflow two-stage furnaces

Settings for these units

Normal status displays (7-segment) · Goodman/Amana GM9S96/AM9S96
Normal status displays (7-segment) · Goodman/Amana GM9S80/AM9S80
Normal status displays (7-segment) · Goodman/Amana GM9C96/AM9C96
Minimum recommended filter size · Goodman/Amana GM9C96/AM9C96

Models that show this code

10 models in Goodman/Amana *MVC95/*CVC9 two-stage ComfortNet

GCVC90704CXGCVC90905DXGCVC91155DXGCVC950714CXGCVC950915DXGMVC950453BXGMVC950704CXGMVC950905CXGMVC950905DXGMVC951155DX

Other codes on the same units

F Continuous fan
HI High-stage heat
Red LED 1 flash Red communications LED 1 flash - communication failure
Red LED 2 flashes Red communications LED 2 flashes - reset in progress
Red LED off Red communications LED off - normal
Rx LED 1 steady flash Green receive LED single steady flash - no network found
Rx LED off Green receive LED off - no power or communications error
Rx LED on solid Green receive LED on solid - data lines miswired or shorted

Save it for the next call

Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.

Open the app

Source: Goodman *CVC9/95 & *MVC95 Installation Instructions IO-341D (08/2010), Status Codes p.58; Operational Checks p.48. Summarized in our own words; check the original manual for your model.

For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.