HTP · Boiler
MAINTENANCE REQUIRED Service reminder
What the display is showing
Message flashes when the service date or run-hour set in System setting 32 to 35 is reached.
Applies to: EL-80, EL-110, EL-150, EL-220, EL-299, EL-399 (N/LP)
Good to know
- Service schedule reached.
What to do
- Arrange service
- After service, hold ENTER 3 seconds, press ENTER again at SERVICE SCHEDULE RESET, pick Year or Hours with the right arrow, press ENTER, adjust with up/down and press ENTER
Models that show this code
12 models in Elite EL
Other codes on the same units
- FOU Outdoor sensor fault
- GAS VALVE ON / RUN Ignition then run status
- LOCKOUT Lockout (display message)
- LOU 24 volt supply low
- PP Control programmed
- PRO Low water pressure
- SERVICE PUMP CH / DH / SH Pump service mode
- SERVICE RUN Test mode running
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: Elite EL-80 N Installation Manual (LP-293), p. 59. Summarized in our own words; check the original manual for your model.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.