HVACopediaFujitsu · Heat pump
29 Connection unit number error (wired remote system)
What the control is telling you
Too many units on one wired remote controller group. Indoor lamps: OPERATION (green) flashes 2x, TIMER (orange) flashes 9x, ECONOMY (green) flashes fast nonstop; wired remote shows 29.
Applies to: Fujitsu ductless heat pumps: Fujitsu ductless split/multi/VRF (general code list), Fujitsu slim duct ARU 7-18 (LL type)
Likely causes
- More than the allowed units on one remote
- Remote address settings wrong
Test and repair steps
- Check how many indoor units share the remote (ducted units: max 16).
- Set R.C. addresses in sequence from 00 with no gaps.
Settings for these units
- Operating range and service space · Fujitsu multi-zone outdoor 18/24 type
Other codes on the same units
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: Fujitsu All Fujitsu split - multi - VRF (generic code list) codes.pdf - section error code table (indoor LED flashes); Fujitsu Slim duct AR07-09-12-14-18 (ARU-ARYG LL-type equivalent) installation P-N 9381858064.pdf - section 14 Error codes. Summarized in our own words; check the original manual for your model.
Homeowner looking at this code? See what it means for you and when to call a technician.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.