Fujitsu · Heat pump

26 Indoor unit address setting error

Medium severity Fujitsu ductless split/multi/VRF (general code list)Fujitsu slim duct ARU 7-18 (LL type)

What the control is telling you

Indoor addresses are duplicated or invalid. Indoor lamps: OPERATION (green) flashes 2x, TIMER (orange) flashes 6x, ECONOMY (green) flashes fast nonstop; wired remote shows 26.

Applies to: Fujitsu ductless heat pumps: Fujitsu ductless split/multi/VRF (general code list), Fujitsu slim duct ARU 7-18 (LL type)

Likely causes

Duplicate / out-of-range address

Test and repair steps

Check and correct indoor address settings, then cycle power.

Settings for these units

Operating range and service space · Fujitsu multi-zone outdoor 18/24 type

Other codes on the same units

21 Address / refrigerant circuit setting error
22 Indoor unit capacity error
23 Combination error
24 Connection unit number error
27 Primary / secondary unit setup error
29 Connection unit number error (wired remote system)
31 Power supply interruption error
32 Indoor main PCB error (EEPROM / model info)

Save it for the next call

Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.

Open the app

Source: Fujitsu All Fujitsu split - multi - VRF (generic code list) codes.pdf - section error code table (indoor LED flashes); Fujitsu Slim duct AR07-09-12-14-18 (ARU-ARYG LL-type equivalent) installation P-N 9381858064.pdf - section 14 Error codes. Summarized in our own words; check the original manual for your model.

Homeowner looking at this code? See what it means for you and when to call a technician.

For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.