HVACopedia

NTI · General troubleshooting

Wall mounting the boiler

TRX

What is going on

Mount the boiler with two people. Use the wall mount kit and the rules for the wall type.

Check in this order

  1. Confirm the wall is concrete, brick, block, or wood studs at 16 in. on center, and can hold at least 150 lbs.
  2. Do not mount to a hollow wall.
  3. Position the upper bracket level on the wall; mark four holes, two per side of the bracket.
  4. For wood studs, make sure the holes land on studs and use field washers with the Fischer screws.
  5. Drill, plug and secure the upper bracket.
  6. Attach the lower bracket to the boiler, hang the boiler on the upper bracket, and make sure it is level.
  7. Mark the lower bracket holes, drill and plug the wall, and secure the lower bracket with field screws.
  8. Make sure the boiler is plumb, then tighten the bracket to the boiler.

Applies to: TRX150, TRX199, TRX199C

More general guides

Related

NTI error codes · NTI parts · NTI tips · Calculators and reference tables

Take it to the job

All guides, error codes and tips work offline in the HVACopedia app.

Open the app

Source: NTI TRX150 manual, p. 14. Written in our own words; check the manual for your exact model.

For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.