HVACopediaViessmann · Boiler
F.574 HC1 room sensor not available
What the control is telling you
Normal operation without room influence.
Applies to: Vitodens 200-W B2HE 85, 120, 150, 199
Likely causes
- Room sensor missing
Test and repair steps
- Check the external room sensor for the heating circuit or the sensor in the remote control.
Models that show this code
4 models in Vitodens 200-W B2HE
Other codes on the same units
- F.547 HC3 mixed supply sensor short circuit
- F.548 HC4 mixed supply sensor fault (open circuit)
- F.549 HC4 mixed supply sensor short circuit
- F.57 Room temperature sensor open circuit
- F.58 Room temperature sensor short circuit
- F.59 Supply voltage too low, burner locked out
- F.62 High limit safety cut-out tripped
- F.63 Flue gas temperature limiter tripped
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: Viessmann Vitodens 200-W B2HE 85/120/150/199 Service Instructions 6167 813-24 (09/2026), Fault messages, p.62-73. Summarized in our own words; check the original manual for your model.
Homeowner looking at this code? See what it means for you and when to call a technician.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.