HVACopediaViessmann · Boiler
F.100 PlusBus voltage error
What the control is telling you
Electronics modules on the PlusBus do not work.
Applies to: Vitodens 200-W B2HE 85, 120, 150, 199
Likely causes
- PlusBus short circuit or overload
- More than 2 Vitotrol 200-E on HMU
Test and repair steps
- Check the PlusBus power supply on the HMU.
- Remove all PlusBus devices and reconnect them one by one.
- Ensure no more than 2 Vitotrol 200-E are on the HMU.
- Check for a short circuit on the PlusBus cable.
Models that show this code
4 models in Vitodens 200-W B2HE
Other codes on the same units
- A.18 Possible condensate back-up in heat cell
- A.19 Temperature limiter has responded
- A.20 Service interval could not be activated
- Connection error Display link lost to HMU
- F.104 External fault message input active
- F.11 Solar collector sensor open circuit
- F.12 Solar collector sensor short circuit
- F.13 Outside temperature sensor open circuit
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: Viessmann Vitodens 200-W B2HE 85/120/150/199 Service Instructions 6167 813-24 (09/2026), Fault messages, p.62-73. Summarized in our own words; check the original manual for your model.
Homeowner looking at this code? See what it means for you and when to call a technician.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.