HVACopediaGree · Heat pump
E0 Outdoor unit fault (shown with another code)
What the control is telling you
Generic outdoor fault flag shown together with the code that caused it.
Applies to: Gree GMV6 Ultra Heat Mini VRF 36-60k (GMV-V..WL/C-T(U))
Likely causes
- See the second code
Test and repair steps
- Read the outdoor board display for the actual code and troubleshoot that one.
Models that show this code
3 models in Gree GMV6 Mini VRF
Other codes on the same units
- d3 Indoor return air sensor open or shorted (15K)
- d4 Indoor coil inlet pipe sensor open or shorted (20K)
- d5 Indoor coil middle pipe sensor open or shorted (20K)
- d6 Indoor coil outlet pipe sensor open or shorted (20K)
- d9 Indoor jumper cap fault
- E1 High pressure protection
- E3 Low pressure protection
- E4 Compressor discharge temperature too high
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: Gree GMV6 Ultra Heat Mini VRF 36-60k (GMV-V36-48-60WL-C-T(U)) service.pdf - section Chapter 3 Faults, 4.1 Error Indication. Summarized in our own words; check the original manual for your model.
Homeowner looking at this code? See what it means for you and when to call a technician.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.