Rheem · Furnace · 96V / 96MDV series

96V series parts

7 replacement parts that fit the Rheem 96V series, with OEM part numbers, grouped by system.

Other

PartPart #QtySize / rating
External Side Filter Rack Kit
Available from distributor for side filter install
RXGF-CA1
External Bottom Filter Rack Kit
Available from distributor for bottom filter install
RXGF-CB1
External Filter Rack Kit - Downflow
Available from distributor for downflow filter install
RXGF-CC1
Prostock pressure tap kit
Contains 3/32 allen-head wrench, 5/16 to 1/4 in. I.D. hose reducer, and a short piece of 5/16 in. I.D. hose.
F0092-100300S11
Accessory filter rack
Field-supplied filter goes in the rack. Flange wraps around the back and screws to the furnace rear at the provided locations. Application text is partly unreadable on the page.
RXGF-CB1
Accessory filter rack
Field-supplied filter goes in the rack. Flange wraps around the back and screws to the furnace rear at the provided locations. Application text is partly unreadable on the page.
RXGF-CC1
Accessory filter rack, upflow/horizontal side return
Cut the filter to size using the embossed angles as a guide. Flange wraps around the back and screws to the furnace rear.
RXGF-CD123 in. x 14 in. field-supplied filter

Same series

The 96V / 96MDV parts list shows every part for all 3 models side by side. Other models: 90 Plus models, 96V / 96MDV.

Source: 96V series installation instructions, p. 42 (pages 42, 75, 79). Part names are written by HVACopedia.

Part numbers are taken from the manufacturer’s published repair parts documents and are listed so you can identify the right part. Manufacturers replace and supersede numbers over time, so confirm the number with your distributor before you order, and use factory-authorized parts on equipment under warranty. Replacing gas, electrical and refrigerant parts is work for a licensed technician. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.