HVACopediaRheem · Furnace parts
Rheem 96V / 96MDV: parts list
11 replacement parts with OEM part numbers for 3 models. Pick your model for a list of only the parts that fit it.
Jump to: Other
Other
| Part | Part # | Fits | Qty | Size / rating |
|---|---|---|---|---|
| Conversion kit RXGY-CK Required for most field conversions | RXGY-CK | 96V / 96MDV | 1 | |
| Zero-clearance kit RXGY-ZK Required for downflow zero-clearance and some horizontal left configurations | RXGY-ZK | 96V / 96MDV | 1 | |
| External Side Filter Rack Kit Available from distributor for side filter install | RXGF-CA | All 3 models | 1 | |
| External Bottom Filter Rack Kit Available from distributor for bottom filter install | RXGF-CB | All 3 models | 1 | |
| External Filter Rack Kit - Downflow Available from distributor for downflow filter install | RXGF-CC | All 3 models | 1 | |
| Prostock pressure tap kit Contains 3/32 allen-head wrench, 5/16 to 1/4 in. I.D. hose reducer, and a short piece of 5/16 in. I.D. hose. | F0092-100300S1 | 96V series | 1 | |
| Accessory filter rack Field-supplied filter goes in the rack. Flange wraps around the back and screws to the furnace rear at the provided locations. Application text is partly unreadable on the page. | RXGF-CB | 96V series | 1 | |
| Accessory filter rack Field-supplied filter goes in the rack. Flange wraps around the back and screws to the furnace rear at the provided locations. Application text is partly unreadable on the page. | RXGF-CC | 96V series | 1 | |
| Accessory filter rack, upflow/horizontal side return Cut the filter to size using the embossed angles as a guide. Flange wraps around the back and screws to the furnace rear. | RXGF-CD | 96V series | 1 | 23 in. x 14 in. field-supplied filter |
| Burner orifice (LP / high altitude) Replace (drill size) with the size from the LP orifice drill table. Example: #60 drill is 62-22175-60. | 62-22175-(drill size) | 90 Plus models | 1 | Drill sizes 39 to 64; metric 1.10 mm (-90) |
| Manifold pressure change label (Figure 43) Affix to front of furnace cabinet after a Canadian manifold pressure derate. Supplied in the information packet. | 92-24399-01-01 | 90 Plus models | 1 |
Source: 96V series installation instructions, p. 42 (pages 42, 75, 79, 82). Part names are written by HVACopedia.
Part numbers are taken from the manufacturer’s published repair parts documents and are listed so you can identify the right part. Manufacturers replace and supersede numbers over time, so confirm the number with your distributor before you order, and use factory-authorized parts on equipment under warranty. Replacing gas, electrical and refrigerant parts is work for a licensed technician. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.