HVACopediaRheem · Furnace · 96V / 96MDV series
90 Plus models parts
5 replacement parts that fit the Rheem 90 Plus models, with OEM part numbers, grouped by system.
Other
| Part | Part # | Qty | Size / rating |
|---|---|---|---|
| External Side Filter Rack Kit Available from distributor for side filter install | RXGF-CA | 1 | |
| External Bottom Filter Rack Kit Available from distributor for bottom filter install | RXGF-CB | 1 | |
| External Filter Rack Kit - Downflow Available from distributor for downflow filter install | RXGF-CC | 1 | |
| Burner orifice (LP / high altitude) Replace (drill size) with the size from the LP orifice drill table. Example: #60 drill is 62-22175-60. | 62-22175-(drill size) | 1 | Drill sizes 39 to 64; metric 1.10 mm (-90) |
| Manifold pressure change label (Figure 43) Affix to front of furnace cabinet after a Canadian manifold pressure derate. Supplied in the information packet. | 92-24399-01-01 | 1 |
Same series
The 96V / 96MDV parts list shows every part for all 3 models side by side. Other models: 96V / 96MDV, 96V series.
Source: 96V series installation instructions, p. 42 (pages 42, 82). Part names are written by HVACopedia.
Part numbers are taken from the manufacturer’s published repair parts documents and are listed so you can identify the right part. Manufacturers replace and supersede numbers over time, so confirm the number with your distributor before you order, and use factory-authorized parts on equipment under warranty. Replacing gas, electrical and refrigerant parts is work for a licensed technician. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.