HVACopediaViessmann · Boiler
F.180 Gas pressure too low
What the control is telling you
Burner in a fault state.
Applies to: Vitodens 200-W B2HE 85, 120, 150, 199
Likely causes
- Low supply gas pressure
- Gas pressure switch fault
Test and repair steps
- Check gas pressure; call the gas utility if needed.
- Check the gas pressure switch; replace the gas fitting if faulty (the switch itself must not be replaced separately).
Models that show this code
4 models in Vitodens 200-W B2HE
Other codes on the same units
- F.16 Storage tank sensor short circuit (solar/backup)
- F.160 CAN bus communication error (external/internal)
- F.161 BCU data memory access error
- F.163 BCU memory checksum error
- F.182 Outlet temperature sensor short circuit
- F.183 Outlet temperature sensor open circuit
- F.184 Supply temperature sensor / high limit short circuit
- F.185 Supply temperature sensor / high limit open circuit
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: Viessmann Vitodens 200-W B2HE 85/120/150/199 Service Instructions 6167 813-24 (09/2026), Fault messages, p.62-73. Summarized in our own words; check the original manual for your model.
Homeowner looking at this code? See what it means for you and when to call a technician.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.