HVACopediaNTI · Boiler
Hold 25 Internal fault: Spark voltage changed too much during flame sensing time
What the control is telling you
Control board self-check reported an internal problem: Spark voltage changed too much during flame sensing time.
Applies to: Trinity Tft60, Tft85, Tft110, Tft154, Tft201, Tft285, Tft340, Tft399
Models that show this code
13 models in Trinity Tft
Other codes on the same units
- Hold 23 Internal fault: Bias changed since heating cycle starts
- Hold 24 Internal fault: Spark voltage stuck low or high
- Hold 24 Internal fault: Spark voltage stuck low or high
- Hold 25 Internal fault: Spark voltage changed too much during flame sensing time
- Hold 26 Internal fault: Static flame ripple
- Hold 26 Internal fault: Static flame ripple
- Hold 27 Flame rod shorted to ground
- Hold 27 Flame rod shorted to ground
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: NTI Trinity Tft399 Installation and Operation Manual (2018-09-07), Sec. 16.0 Troubleshooting, Table 16-3. Summarized in our own words; check the original manual for your model.
Homeowner looking at this code? See what it means for you and when to call a technician.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.