HVACopediaNTI · Boiler
Hold 24 Internal fault: Spark voltage stuck low or high
What the control is telling you
Control board self-check reported an internal problem: Spark voltage stuck low or high.
Applies to: Trinity Tft60, Tft85, Tft110, Tft154, Tft201, Tft285, Tft340, Tft399
Models that show this code
13 models in Trinity Tft
Other codes on the same units
- Hold 22 Internal fault: Flame bias out of range
- Hold 23 Internal fault: Bias changed since heating cycle starts
- Hold 23 Internal fault: Bias changed since heating cycle starts
- Hold 24 Internal fault: Spark voltage stuck low or high
- Hold 25 Internal fault: Spark voltage changed too much during flame sensing time
- Hold 25 Internal fault: Spark voltage changed too much during flame sensing time
- Hold 26 Internal fault: Static flame ripple
- Hold 26 Internal fault: Static flame ripple
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: NTI Trinity Tft399 Installation and Operation Manual (2018-09-07), Sec. 16.0 Troubleshooting, Table 16-3. Summarized in our own words; check the original manual for your model.
Homeowner looking at this code? See what it means for you and when to call a technician.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.