HVACopediaNavien · Boiler
Status Information Status Information menu
What the display is showing
Read-only list of 28 boiler data items (1 Operation State through 28 Panel F/W Ver). Menu, then 1. Status Information.
Applies to: NHB-055H, NHB-080H, NHB-110H, NHB-150H
What to do
- Press Menu, choose 1. Status Information.
- Turn the Command dial to scroll, press it to see the value.
- Press Back to leave.
Settings for these units
Installation clearances (indoor) · Navien NHB-H
| Side | Minimum clearance |
|---|---|
| Top | 9 in (229 mm) |
| Back | 0.5 in (13 mm) |
| Front | 4 in (100 mm) |
| Sides | 3 in (76 mm) |
| Bottom | 12 in (300 mm) |
| Vent to combustibles | 0 in |
Bracket gives 5/8 in (16 mm) from the wall; studs at 16 in on centre.
Common vent installs: 36 in above the top and 24 in in front are recommended for service.
Models that show this code
4 models in Navien NHB-H
Other codes on the same units
- SH Set Temp Status Information item 3 - SH Set Temp
- Service menu Advanced / service menu (Back + Menu)
- Space heating demand icon Space heating demand
- Space heating temperature Space heating temperature display
- Supply Limit - No. of Times EMS Data counter 9
- Supply Temp Status Information item 6 - Supply Temp
- Sys Return Temp Status Information item 9 - Sys Return Temp
- Sys Supply Temp Status Information item 8 - Sys Supply Temp
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: Navien NHB-H User's Information Manual (V1.0 Apr 2024), 3.3, p.13-14; Navien NHB-H Installation and Operation Manual, 11.7, p.103-104. Summarized in our own words; check the original manual for your model.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.