HVACopediaNavien · Boiler
EMS Data EMS Data menu (history counters)
What the display is showing
Menu 5. EMS Data shows miscellaneous system information, a set of history counters listed individually (elapsed time, overheat, flame loss and ignition retry counts, temperature-limit counts). Table placement in the text export is a little unclear, so confirm against the manual page.
Applies to: NHB-055H, NHB-080H, NHB-110H, NHB-150H
What to do
- Press Menu, choose 5. EMS Data.
- Scroll with the Command dial, press to view.
Settings for these units
Installation clearances (indoor) · Navien NHB-H
| Side | Minimum clearance |
|---|---|
| Top | 9 in (229 mm) |
| Back | 0.5 in (13 mm) |
| Front | 4 in (100 mm) |
| Sides | 3 in (76 mm) |
| Bottom | 12 in (300 mm) |
| Vent to combustibles | 0 in |
Bracket gives 5/8 in (16 mm) from the wall; studs at 16 in on centre.
Common vent installs: 36 in above the top and 24 in in front are recommended for service.
Models that show this code
4 models in Navien NHB-H
Other codes on the same units
- DHW priority icon DHW priority enabled
- DHW temperature DHW temperature display
- DHW/Zone1 Pump Status Input/Output Status item 6 - DHW/Zone1 Pump Status
- Dual Venturi Status Input/Output Status item 13 - Dual Venturi Status
- Elapsed Time After Install EMS Data counter 1
- Error History Error history list
- Exhaust Temp Status Information item 20 - Exhaust Temp
- Fan Current APS Status Information item 19 - Fan Current APS
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: Navien NHB-H Installation and Operation Manual, 11.11 Viewing Other System Information, p.108-109. Summarized in our own words; check the original manual for your model.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.