HVACopediaTrane · Furnace
LED flashing fast Normal - call for heat
What the display is showing
The IFC LED blinks fast during a heat call.
Applies to: *UH1B040A9241A, *UH1B060A9361A, *UH1B080A9421B, *UH1C080A9601A, *UH1C100A9481A, *UH1D100A9601A, *UH1D120A9601A, *DH1B040A9241A, *DH1B065A9421A, *DH1C085A9481A, *DH1D110A9601A
Settings for these units
- Clearance to combustibles · Trane S8V2
- Return filter size by cabinet width · Trane S8V2
- Return filter size by cabinet width · Trane S8B1, Trane S8X1, Trane S8X2
- Return filter size - upflow and downflow · Trane S9X1, Trane S9X2, Trane S9B1
- Clearance to combustibles · Trane S9X1, Trane S9X2, Trane S9B1
- Return filter size - upflow and downflow · Trane S9V2
Models that show this code
16 models in UH1, UH1/DH1
Other codes on the same units
- LED continuous OFF No power to control
- LED continuous ON IFC board fault - replace control
- LED flashing slow Normal - no call for heat
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: Trane 18-CD29D1-11 Installer's Guide, Table 21 Integrated Furnace Control Error Flash Codes p.39. Summarized in our own words; check the original manual for your model.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.