HVACopediaNavien · Boiler
Fan Target APS Status Information item 18 - Fan Target APS
What the display is showing
Commanded air pressure sensor (APS) voltage (V). Read-only item 18 in the Status Information menu.
Applies to: NHB-055H, NHB-080H, NHB-110H, NHB-150H
What to do
- Menu > 1. Status Information > scroll to the item.
Settings for these units
Installation clearances (indoor) · Navien NHB-H
| Side | Minimum clearance |
|---|---|
| Top | 9 in (229 mm) |
| Back | 0.5 in (13 mm) |
| Front | 4 in (100 mm) |
| Sides | 3 in (76 mm) |
| Bottom | 12 in (300 mm) |
| Vent to combustibles | 0 in |
Bracket gives 5/8 in (16 mm) from the wall; studs at 16 in on centre.
Common vent installs: 36 in above the top and 24 in in front are recommended for service.
Models that show this code
4 models in Navien NHB-H
Other codes on the same units
- Error History Error history list
- Exhaust Temp Status Information item 20 - Exhaust Temp
- Fan Current APS Status Information item 19 - Fan Current APS
- Fan Current RPM Status Information item 17 - Fan Current RPM
- Fan Target RPM Status Information item 16 - Fan Target RPM
- Flame Loss - No. of Times EMS Data counter 3
- Flame Value Status Information item 15 - Flame Value
- Freeze Protection icon Freeze protection mode active
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: Navien NHB-H User's Information Manual (V1.0 Apr 2024), 3.3, p.13-14; Navien NHB-H Installation and Operation Manual, 11.7, p.103-104. Summarized in our own words; check the original manual for your model.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.