Midea · Mini-split

FP Low-temperature heating (8 C mode)

Normal status Midea DLFSHBH wall indoor (DLCM multi-zone)

What the display is showing

Heating to hold the room around 8 C (46 F), the freeze-protect mode.

Applies to: DLFSHBH high wall indoor units 09-24K (Midea / Carrier / Viessmann) on DLC multi-zone or single-zone outdoor units

Models that show this code

5 models in Midea DLFSHBH wall indoor (DLCM multi-zone)

DLFSHBH09XAKDLFSHBH12XAJDLFSHBH12XAKDLFSHBH18XAKDLFSHBH24XAK

Other codes on the same units

AP Wi-Fi pairing (AP mode)
CL Filter cleaning reminder / Active Clean
CP Remote switched off
E-C-O ECO mode
FC Forced cooling
FH 0P AP mode on / no Wi-Fi kit
FH 0d Fault - see outdoor unit
LL Controls locked

Save it for the next call

Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.

Open the app

Source: Midea DLFSHBH09XAK indoor display table (photo, 2026-10-16); Carrier MS-DLFSHB-01 High Wall Ductless Service Manual (04/2021), Display Function p.12. Summarized in our own words; check the original manual for your model.

For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.