Midea · technician tips

Midea service menus, test modes and resets

1 tips for furnace: access codes, button combinations, test modes and the resets you need at the appliance.

Jump to: Reset & cancel (1)

Reset & cancel

Clearing lockouts, service reminders and fault history; skipping purge or de-air programs.

Clear an ignition lockout (E7) early

Furnace · Midea 96% AFUE A2L Gas Furnace (BGH96M)

After two failed ignition attempts the control locks out with E7.

1. Remove 115 V power or the thermostat call for 1-20 s.

Applies to: BGH96M060B3A, BGH96M080B3A, BGH96M080C4A, BGH96M100C5A, BGH96M100D5A, BGH96M120D5A

Source: Midea A2L 96% AFUE Gas Furnace Troubleshooting Guide, Appendix A Sequence of Operation, Figures 24-26, p.7, 11, 24-26. Written in our own words; check the manual for your exact model.

Same tips in your pocket

The HVACopedia app has these tips, every error code and the settings tables offline.

Open the app

For licensed technicians. Installer menus, test modes and access codes change settings that affect safety; only use them if you are trained on the appliance and understand the result. Gas, electrical and refrigerant work must be done by a qualified, licensed person, and the manufacturer’s manual for the exact model and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.