HVACopediaNTI · Boiler
Lockout 249 STAT cannot be demand source when Remote Stat is enabled
What the control is telling you
STAT cannot be demand source when Remote Stat is enabled.
Applies to: Trinity Tft60, Tft85, Tft110, Tft154, Tft201, Tft285, Tft340, Tft399
Models that show this code
13 models in Trinity Tft
Other codes on the same units
- Lockout 245 Invalid Outlet connector type setting for T-rise
- Lockout 246 4-20mA cannot be used for both modulation and setpoint control
- Lockout 247 Invalid ILK bounce detection enable
- Lockout 248 Invalid forced recycle interval
- Lockout 250 Invalid Fan speed error response
- Lockout 251 Lead drop-stage on error setting does not match drop method configuration
- Lockout 252 Invalid Line frequency setting
- Lockout 253 Lead Lag modulation sensor not valid with setpoint source
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: NTI Trinity Tft399 Installation and Operation Manual (2018-09-07), Sec. 16.0 Troubleshooting, Table 16-3. Summarized in our own words; check the original manual for your model.
Homeowner looking at this code? See what it means for you and when to call a technician.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.