HVACopediaNTI · Boiler
Alert 67 Fan off cycle rate was invalid, % vs. RPM
What the control is telling you
Fan off cycle rate was invalid, % vs. RPM.
Applies to: Trinity Tft60, Tft85, Tft110, Tft154, Tft201, Tft285, Tft340, Tft399
Models that show this code
13 models in Trinity Tft
Other codes on the same units
- Alert 65 Burner control rate (non-firing) was absent
- Alert 66 Burner control rate (non-firing) was invalid, % vs. RPM
- Alert 66 Burner control rate (non-firing) was invalid, % vs. RPM
- Alert 67 Fan off cycle rate was invalid, % vs. RPM
- Alert 68 Set point was over ridden due to sensor fault
- Alert 68 Set point was over ridden due to sensor fault
- Alert 69 Modulation was over ridden due to sensor fault
- Alert 69 Modulation was over ridden due to sensor fault
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: NTI Trinity Tft399 Installation and Operation Manual (2018-09-07), Sec. 16.0 Troubleshooting, Table 16-4. Summarized in our own words; check the original manual for your model.
Homeowner looking at this code? See what it means for you and when to call a technician.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.