HVACopediaNTI · Boiler
Alert 32 Program Module (PM) was removed from socket
What the control is telling you
Program Module (PM) was removed from socket.
Applies to: Trinity Tft60, Tft85, Tft110, Tft154, Tft201, Tft285, Tft340, Tft399
Models that show this code
13 models in Trinity Tft
Other codes on the same units
- Alert 317 Abnormal Recycle: Fan failed during Pre-Ignition test
- Alert 318 Abnormal Recycle: Fan failed during Pre-Ignition time
- Alert 319 Abnormal Recycle: Fan failed during Ignition period
- Alert 32 Program Module (PM) was removed from socket
- Alert 320 Abnormal Recycle: Fan failed during Main Flame Establishing Period
- Alert 321 Abnormal Recycle: Main Valve off after 10 seconds of RUN
- Alert 322 Abnormal Recycle: Pilot Valve off after 10 seconds of RUN
- Alert 323 Abnormal Recycle: Safety Relay off after 10 seconds of RUN
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: NTI Trinity Tft399 Installation and Operation Manual (2018-09-07), Sec. 16.0 Troubleshooting, Table 16-4. Summarized in our own words; check the original manual for your model.
Homeowner looking at this code? See what it means for you and when to call a technician.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.