HVACopediaNTI · Boiler
Alert 313 Run was terminated due to fan failure
What the control is telling you
Run was terminated due to fan failure.
Applies to: Trinity Tft60, Tft85, Tft110, Tft155, Tft175, Tft200, Tft250, Tft300, Tft399
Models that show this code
13 models in Trinity Tft
Other codes on the same units
- Alert 31 Program Module (PM) was inserted into socket
- Alert 310 Run was terminated due to ILK was off
- Alert 311 Run was terminated due to interrupted air flow switch was off
- Alert 312 Stuck reset switch
- Alert 314 Abnormal Recycle: Fan failed during Drive to Purge Rate
- Alert 315 Abnormal Recycle: Fan failed during Measured Purge Time
- Alert 316 Abnormal Recycle: Fan failed during Drive to Light off Rate
- Alert 317 Abnormal Recycle: Fan failed during Pre-Ignition test
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: NTI Tft60-399 Installation and Operation Instructions (rev. 2012-04-09), Sec. 15.0 Troubleshooting, Table 15-4. Summarized in our own words; check the original manual for your model.
Homeowner looking at this code? See what it means for you and when to call a technician.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.