HVACopediaNTI · Boiler
Alert 289 Abnormal Recycle: Flame was on during Measured Purge Time
What the control is telling you
Abnormal Recycle: Flame was on during Measured Purge Time.
Applies to: Trinity Tft60, Tft85, Tft110, Tft155, Tft175, Tft200, Tft250, Tft300, Tft399
Models that show this code
13 models in Trinity Tft
Other codes on the same units
- Alert 285 Abnormal Recycle: Demand off during Pre-Ignition test
- Alert 286 Abnormal Recycle: Demand off during Pre-Ignition time
- Alert 287 Abnormal Recycle: Flame was on during Safe Start check
- Alert 288 Abnormal Recycle: Flame was on during Drive to Purge Rate
- Alert 29 Burner switch was turned OFF
- Alert 29 Burner switch was turned OFF
- Alert 290 Abnormal Recycle: Flame was on during Drive to Light off Rate
- Alert 291 Abnormal Recycle: Flame was not on at end of Ignition period
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: NTI Tft60-399 Installation and Operation Instructions (rev. 2012-04-09), Sec. 15.0 Troubleshooting, Table 15-4. Summarized in our own words; check the original manual for your model.
Homeowner looking at this code? See what it means for you and when to call a technician.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.