HVACopediaNTI · Boiler
Alert 224 DHW frost protection temperature was invalid
What the control is telling you
DHW frost protection temperature was invalid.
Applies to: Trinity Tft60, Tft85, Tft110, Tft155, Tft175, Tft200, Tft250, Tft300, Tft399
Models that show this code
13 models in Trinity Tft
Other codes on the same units
- Alert 21 Invalid safety group verification table was not accepted
- Alert 22 CRC errors were found in application configuration data blocks
- Alert 222 CH frost protection temperature was invalid
- Alert 223 CH frost protection inlet temperature was invalid
- Alert 23 Backup Alert PCB was restored from active one
- Alert 231 LL set point was invalid
- Alert 232 LL time of day set point was invalid
- Alert 233 Lead-lag outdoor temperature invalid
Save it for the next call
Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.
Source: NTI Tft60-399 Installation and Operation Instructions (rev. 2012-04-09), Sec. 15.0 Troubleshooting, Table 15-4. Summarized in our own words; check the original manual for your model.
Homeowner looking at this code? See what it means for you and when to call a technician.
For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.