Fujitsu · Heat pump

57 Damper error

Low severity Fujitsu ductless split/multi/VRF (general code list)Fujitsu wall-mounted 7-15 (NA ASU/AOU type)Fujitsu slim duct ARU 7-18 (LL type)

What the control is telling you

A motorized damper is not working. Indoor lamps: OPERATION (green) flashes 5x, TIMER (orange) flashes 7x, ECONOMY (green) flashes fast nonstop; wired remote shows 57.

Applies to: Fujitsu ductless heat pumps: Fujitsu ductless split/multi/VRF (general code list), Fujitsu wall-mounted 7-15 (NA ASU/AOU type), Fujitsu slim duct ARU 7-18 (LL type)

Likely causes

  • Damper motor / wiring

Test and repair steps

  1. Check damper wiring and motor; replace if faulty.

Settings for these units

Other codes on the same units

  • 44 Human (occupancy) sensor error
  • 51 Indoor fan motor error
  • 52 Indoor electronic expansion valve error
  • 53 Drain pump error
  • 58 Intake grille error
  • 61 Outdoor reverse / missing phase or wiring error
  • 62 Outdoor main PCB error (EEPROM / model / micro comms)
  • 63 Inverter error

Save it for the next call

Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.

Open the app

Source: Fujitsu All Fujitsu split - multi - VRF (generic code list) codes.pdf - section error code table (indoor LED flashes); Fujitsu Wall-mounted 7-9-12-15 (North American trilingual, UTY-RNNUM remotes; e.g. ASU9-12-15 RLF1-RLS familie.pdf - section 14 Error codes; Fujitsu Slim duct AR07-09-12-14-18 (ARU-ARYG LL-type equivalent) installation P-N 9381858064.pdf - section 14 Error codes. Summarized in our own words; check the original manual for your model.

Homeowner looking at this code? See what it means for you and when to call a technician.

For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.